AIMS Power 4000 Watt Pure Sine Inverter Charger 12 VDC 120 VAC 50/60Hz PICOGLF40W12V120V

Original price was: $1,454.00.Current price is: $1,381.30.

-5%Sale!

4000 Watt Pure Sine Inverter Charger 12Vdc to 120Vac Output

This 4000 watt inverter charger produces a pure sine wave, which some appliances require for use. So it can run laser jet printers, computers, televisions, CPAP machines and other medical equipment.

During a big storm that knocks out electricity, a battery-bank and power inverter running a sump pump could be the difference that saves a home from flooding. The power to run a heater could save someone thousands of dollars by keeping plumbing pipes from freezing.

Also great for emergency backup power applications is the automatic transfer switch on this unit, which keeps the power supply uninterrupted in the event of an outage. With the inverter hooked up to shore power, it will detect the loss of electricity and start pulling energy from a connected battery bank instead to keep the power supply constant.

  • 4000 watt low frequency inverter
  • 12000 watt surge for 20 seconds 300% surge capability
  • Battery priority selector
  • AC direct connect terminal bock for hardwire
  • Marine coated and protected
  • Multi stage smart charger 100 Amp
  • Charges lithium LiFePO4, GEL, AGM and lead batteries. We recommend to check battery charging specifications for all batteries.
  • Remote panel available
  • Auto frequency
  • 10msec typical transfer time
  • Selectable 25W power save mode (hibernation)
  • 7 battery type settings for charger
  • Automatic transfer switch

Inverter Output Specifications:

  • Continuous Output Power: 4000 Watts
  • Surge Rating: 12000 Watts (20 Seconds)
  • Output Waveform: Pure Sine/Same as input (Bypass Mode)
  • Nominal Efficiency: >88% (Peak)
  • Line Mode Efficiency: >95%
  • Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
  • Typical Transfer Time: 10ms (Max)
  • THD: < 10% DC
  • Ambient Operating Temperature: 14°F to 122°F (-10°C to 50°C)

Input Specifications

  • Nominal Input Voltage: 12.0Vdc
  • Minimum Start Voltage: 10.0Vdc
  • Low Battery Alarm: 10.5Vdc-11.0Vdc
  • Low Battery Trip: 10.0Vdc-10.5Vdc
  • High Voltage Shutdown: 16.0Vdc
  • Low Battery Voltage Restart: 13.3Vdc
  • Idle Consumption: <3.47 amps DC
  • Power Saver Mode Idle Consumption: <0.53 amps DC

Charger Specifications

  • Output voltage: depends on battery type
  • Charger rate: 115A
  • Over charge protection shutdown 15.7V
  • Selectable charge setting based on battery type
  • Adjustable charge current: off-20%-100%
  • Four stage smart charger

Transfer Switch Specifications

  • 40 amp automatic transfer switch
  • 10 ms (max)

Dimensions

  • Unit Weight: 64 lbs.
  • Unit Size L x W x H: 27.88 x 8.75 x 7.10 inches
  • Shipping Weight: 75 lbs.
  • Shipping L x W x H 30.5 x 14.25 x 13.75 inches

 

Description

4000 Watt Pure Sine Inverter Charger 12Vdc to 120Vac Output

This 4000 watt inverter charger produces a pure sine wave, which some appliances require for use. So it can run laser jet printers, computers, televisions, CPAP machines and other medical equipment.

During a big storm that knocks out electricity, a battery-bank and power inverter running a sump pump could be the difference that saves a home from flooding. The power to run a heater could save someone thousands of dollars by keeping plumbing pipes from freezing.

Also great for emergency backup power applications is the automatic transfer switch on this unit, which keeps the power supply uninterrupted in the event of an outage. With the inverter hooked up to shore power, it will detect the loss of electricity and start pulling energy from a connected battery bank instead to keep the power supply constant.

  • 4000 watt low frequency inverter
  • 12000 watt surge for 20 seconds 300% surge capability
  • Battery priority selector
  • AC direct connect terminal bock for hardwire
  • Marine coated and protected
  • Multi stage smart charger 100 Amp
  • Charges lithium LiFePO4, GEL, AGM and lead batteries. We recommend to check battery charging specifications for all batteries.
  • Remote panel available
  • Auto frequency
  • 10msec typical transfer time
  • Selectable 25W power save mode (hibernation)
  • 7 battery type settings for charger
  • Automatic transfer switch

Inverter Output Specifications:

  • Continuous Output Power: 4000 Watts
  • Surge Rating: 12000 Watts (20 Seconds)
  • Output Waveform: Pure Sine/Same as input (Bypass Mode)
  • Nominal Efficiency: >88% (Peak)
  • Line Mode Efficiency: >95%
  • Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
  • Typical Transfer Time: 10ms (Max)
  • THD: < 10% DC
  • Ambient Operating Temperature: 14°F to 122°F (-10°C to 50°C)

Input Specifications

  • Nominal Input Voltage: 12.0Vdc
  • Minimum Start Voltage: 10.0Vdc
  • Low Battery Alarm: 10.5Vdc-11.0Vdc
  • Low Battery Trip: 10.0Vdc-10.5Vdc
  • High Voltage Shutdown: 16.0Vdc
  • Low Battery Voltage Restart: 13.3Vdc
  • Idle Consumption: <3.47 amps DC
  • Power Saver Mode Idle Consumption: <0.53 amps DC

Charger Specifications

  • Output voltage: depends on battery type
  • Charger rate: 115A
  • Over charge protection shutdown 15.7V
  • Selectable charge setting based on battery type
  • Adjustable charge current: off-20%-100%
  • Four stage smart charger

Transfer Switch Specifications

  • 40 amp automatic transfer switch
  • 10 ms (max)

Dimensions

  • Unit Weight: 64 lbs.
  • Unit Size L x W x H: 27.88 x 8.75 x 7.10 inches
  • Shipping Weight: 75 lbs.
  • Shipping L x W x H 30.5 x 14.25 x 13.75 inches

 

Additional information

Weight 75 lbs