Description
**Please Note: The DSE9462 Dual Battery Charger has been discontinued and is no longer available. DSE does not have a “Dual” charger as a direct replacement; however you can choose your replacement by your amps/voltage.
For 12/24 Volt, 10 Amp use:
BC2410Ei (Meters)
BC2410Ei (Display)
BC2410Ei (Display & Meters)
For 12/24 Volt, 15 Amp use:
Our Multiple Output Chargers have been developed to provide intelligent, lightweight charging for use on-board standby vehicles and systems that use multiple applications or loads. Chargers within the range can be configured to provide different output levels and programmed for optimum performance with different charging curves to maximise the life of the battery.
The DSE9462 is configured using the DSE Configuration Suite software via a USB connection. The charger is mounted to a chassis using the fixing holes that are built into the case. The charger’s stylish design includes four coloured LEDs to indicate charging status and fault conditions. For added durability, reliability and silent operation the charger utilises solid state technology with no moving parts.
OVERALL SIZE
290 mm x 157 mm x 67 mm (9.4″ x 10.4 ” x 3.5″)
WEIGHT
1.8kg
PRODUCT VARIANTS
9462-01 – 24 Volt 15 Amp & 12 Volt 10 Amp Dual Output Intelligent Battery Charger (90-305v)
AC SUPPLY
VOLTAGE RANGE
90 V to 305 V (L-N)
FREQUENCY RANGE
48 Hz to 64 Hz (L-N)
DC OUTPUT RATING
CHANNEL 1
15 A DC at 24 V DC
CHANNEL 2
10 A DC at 12 V DC
RIPPLE AND NOISE
2% x Vo
EFFICIENCY AND POWER FACTOR
>90% at 0.9pf
REGULATION
LINE
<0.5% x Vo
LOAD
1% x Vo
TEMPERATURE SENSOR INPUTS
NUMBER
2
PROTECTIONS
Short Circuit
DC Under & Over Voltage
DC Over Current
Reverse Polarity
Over Temperature
AC Under & Over Voltage
