Description

The E100 is an Engine Only Control Module designed to provide flexible engine control with built-in monitoring and protection. The module is fully configurable for a wide range of applications including engine driven pumps and compressors.

Control functions include manual and automatic engine start and load control and built-in run-time scheduler. The DSEE100 also features an event log to help make fault diagnosis extremely simple. The module is configured using the DSE Configuration Suite software.

OVERALL SIZE
140 mm x 113 mm x 43 mm (5.5″ x 4.4″ x 1.7″)

PANEL CUT OUT
118 mm x 92 mm (4.6″ x 3.6″)

PRODUCT VARIANTS
E100-01 – E100 Engine Controller

DC SUPPLY

CONTINUOUS VOTLAGE RATING
8 V to 35 V continuous

CRANKING DROPUTS
Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries.

MAXIMUM OPERATING CURRENT
85 mA at 12 V, 96 mA at 24 V

MAXIMUM STANDBY CURRENT
51 mA at 12 V, 47 mA at 24 V

MAXIMUM SLEEP CURRENT
35 mA at 12 V, 32 mA at 24 V

CHARGE FAIL/EXCITATION RANGE
0 V to 35 V

INPUTS

DIGITAL INPUTS A to D
Negative switching

ANALOGUE INPUTS A to C
Configurable as:
Negative switching digital input
Resistive

OUTPUTS

DC OUTPUT A (FUEL) & B (START)
10 A short-term
5 A continuous at supply voltage

VOLT-FREE OUTPUTS C & D
2 A DC at supply voltage

AUXILIARY OUTPUTS C, D, E & F
2 A DC at supply voltage

PULSE PICK-UP

VOLTAGE RANGE
+/- 0.5 V to 70 V

FREQUENCY RANGE
5 Hz to 10,000 Hz