Description
The DSEE400 is an IP67 rated engine control module that offers flexible control with built-in monitoring and protection. The control module is compatible with both electronic and mechanical diesel engines and be fully configured for a wide range of applications including engine driven pumps and compressors.
All engine control functions including engine start, speed and clutch control can be achieved automatically and manually.
NOW INCLUDES ADVANCED PLC EDITOR FUNCTIONALITY
OVERALL SIZE
189 mm x 125 mm x 54 mm (7.5″ x 4.9″ x 2.1″)
PANEL CUT OUT
148 mm x 112 mm (5.8″ x 4.4″)
PRODUCT VARIANTS
E400-01 – E400 Engine Controller
E400-02 – E400 Engine Controller (Htr)
RELATED PARTS
007-850 – Deutsch connector A (DT16-18SA-k004), 18 way complete with pins.
007-851 – Deutsch connector C (DT16-18SC-K004), 18 way complete with pins.
007-852 – Set of 2 harnesses, a & C connectors, pre-wired, 1.2 m cables marked.
DC SUPPLY
CONTINUOUS VOLTAGE RATING
8 V to 35 V continuous
CRANKING DROPUTS
Able to survive 0 V for 100 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries.
MAXIMUM OPERATING CURRENT
326 mA at 12 V, 164 mA at 24 V
MAXIMUM STANDBY CURRENT
119 mA at 12 V, 60 mA at 24 V
MAXIMUM OFF MODE CURRENT
76 mA at 12 V, 38 mA at 24 V
CHARGE FAIL/EXCITATION RANGE
0 V to 35 V
INPUTS
DIGITAL INPUTS A to D
Configurable as:
Positive switching
Negative switching
ANALOGUE INPUTS A to G
Configurable as:
Negative switching digital input
0 V to 10 V
4 mA to 20 mA
Resistive
OUTPUTS
DC OUTPUT A (FUEL) & B (START)
10 A for 10 seconds,
5 A continuous at supply voltage
VOLT-FREE OUTPUTS C & D
2 A DC at supply voltage
PWMI OUTPUTS E & F
4 A at supply voltage
20 Hz to 250 Hz
PULSE PICK-UP
VOLTAGE RANGE
0.5 V to 60 V RMS
Fully isolated
FREQUENCY RANGE
5 Hz to 10,000 Hz
GOVERNOR OUTPUT
Fully isolated
VOLTAGE OUTPUT
0 V to 10 V range
1000 Ω minimum load impedance
CURRENT OUTPUT
0 V to 20 mA range
500 Ω maximum load impedance
